ISC Class 12 Physics Ampere’s Circuital Law, Solenoid and Toroid Numerical Problems with Solutions

  • Last modified on:14 hours ago
  • Reading Time:13Minutes
Home ISC Class 12 Physics ISC Class 12 Physics Numericals ISC Class 12 Physics Ampere’s Circuital Law, Solenoid and Toroid Numerical Problems with Solutions

Practice topic-wise numerical problems on Ampere’s Circuital Law, Solenoid and Toroid for ISC Class 12 Physics. These questions cover magnetic field due to a long straight conductor using Ampere’s law, field inside and at the end of a solenoid, magnetic flux through a solenoid, solenoid design and magnetic field in a toroid.

Attempt each problem independently and then use the Show Answer & Explanation button to check the final answer and complete detailed solution.

Numerical Problems on Ampere’s Circuital Law, Solenoid and Toroid

ISC Class 12 Physics · Chapter 4 · Moving Charges and Magnetism
N

Ampere’s Circuital Law, Solenoid and Toroid Numericals

Practice numerical problems with answers and detailed solutions
ISC Class 12 · Chapter 4
1
(i) Using Ampere’s circuital law, obtain an expression for the magnetic flux density $B$ at a point $X$ at a perpendicular distance $r$ from a long current-carrying conductor. (Statement of the law is not required).
(ii) $PQ$ is a long straight conductor carrying a current of 3 A as shown in the figure. An electron moves with a velocity of $2\times10^7\,\mathrm{m/s}$ parallel to it. Find the force acting on the electron.
Long straight conductor PQ carrying 3 A current with an electron moving parallel to it at a distance of 0.6 m
[ISC 2017] (3 M)
Answer (i) $B=\dfrac{\mu_0 I}{2\pi r}$    (ii) $F=3.2\times10^{-18}\,\mathrm{N}$, towards the wire 📝
Detailed Solution
Circular Amperian loop around a long straight current-carrying conductor

(i) Consider a circular Amperian loop of radius $r$ around a long straight conductor carrying current $I$.

By symmetry, the magnetic field has the same magnitude at every point on the circular path and is tangential to it.

Using Ampere’s circuital law,

$$ \oint \mathbf{B}\cdot d\mathbf{l}=\mu_0 I $$

Since $\mathbf{B}$ is parallel to $d\mathbf{l}$ everywhere on the circular path,

$$ B\oint dl=\mu_0 I $$
$$ B(2\pi r)=\mu_0 I $$

Therefore,

$$ \boxed{ B=\frac{\mu_0 I}{2\pi r} } $$

(ii) For the given wire,

$$ I=3\,\mathrm{A} $$
$$ r=0.6\,\mathrm{m} $$

Hence, the magnetic field at the position of the electron is

$$ B= \frac{4\pi\times10^{-7}\times3} {2\pi\times0.6} $$
$$ B=1.0\times10^{-6}\,\mathrm{T} $$

The electron moves parallel to the wire, so its velocity is perpendicular to the magnetic field at that point.

$$ F=qvB $$

Using the magnitude of electronic charge,

$$ F= 1.6\times10^{-19} \times 2\times10^7 \times 10^{-6} $$
$$ F=3.2\times10^{-18}\,\mathrm{N} $$

By the magnetic-force rule, the force on the negatively charged electron is directed towards the current-carrying wire.

2
A solenoid of length 50 cm having 100 turns carries a current of 2.5 A. Find the magnetic field
(i) in the interior of the solenoid.
(ii) at one end of the solenoid. (2 M)
Answer (i) $6.28\times10^{-4}\,\mathrm{T}$    (ii) $3.14\times10^{-4}\,\mathrm{T}$ 📝
Detailed Solution

Given,

$$ l=50\,\mathrm{cm}=0.50\,\mathrm{m} $$
$$ N=100,\qquad I=2.5\,\mathrm{A} $$

Number of turns per unit length is

$$ n=\frac{N}{l} =\frac{100}{0.50} =200\,\mathrm{m^{-1}} $$

(i) Field inside the solenoid

$$ B=\mu_0nI $$
$$ B= 4\pi\times10^{-7} \times200 \times2.5 $$
$$ B=6.28\times10^{-4}\,\mathrm{T} $$

(ii) Field at one end

$$ B_{\text{end}} = \frac{\mu_0nI}{2} $$
$$ B_{\text{end}} = \frac{6.28\times10^{-4}}{2} = 3.14\times10^{-4}\,\mathrm{T} $$
3
A solenoid of length 1.0 m and 3.0 cm diameter has 5 layers of windings of 850 turns each and carries a current of 5 A. What is the magnetic field at the centre of the solenoid? Also, calculate the magnetic flux through a cross-section of the solenoid at its centre. (2 M)
Answer Magnetic field $=2.67\times10^{-2}\,\mathrm{T}$; magnetic flux $=1.89\times10^{-5}\,\mathrm{Wb}$ 📝
Detailed Solution

Total number of turns is

$$ N=850\times5=4250 $$

Given,

$$ l=1.0\,\mathrm{m},\qquad I=5\,\mathrm{A} $$

Turns per unit length:

$$ n=\frac{N}{l} =4250\,\mathrm{m^{-1}} $$

The field at the centre of a long solenoid is

$$ B=\mu_0nI $$
$$ B= 4\pi\times10^{-7} \times4250 \times5 $$
$$ B\approx2.67\times10^{-2}\,\mathrm{T} $$

The diameter is 3.0 cm, so the radius is

$$ r=1.5\,\mathrm{cm} =1.5\times10^{-2}\,\mathrm{m} $$

Cross-sectional area:

$$ A=\pi r^2 $$
$$ A= \pi(1.5\times10^{-2})^2 \approx7.07\times10^{-4}\,\mathrm{m^2} $$

Therefore, the magnetic flux through the cross-section is

$$ \Phi=BA $$
$$ \Phi= 2.67\times10^{-2} \times 7.07\times10^{-4} $$
$$ \Phi\approx1.89\times10^{-5}\,\mathrm{Wb} $$
4
A magnetic field of $100\,\mathrm{G}$ $(1\,\mathrm{G}=10^{-4}\,\mathrm{T})$ is required which is uniform in a region of linear dimension about 10 cm and area of cross-section about $10^{-3}\,\mathrm{m^2}$. The maximum current-carrying capacity of a given coil of wire is 15 A and the number of turns per unit length that can be wound round a core is at most 1000 turns $\mathrm{m^{-1}}$. Suggest some appropriate design particulars of a solenoid for the required purpose. Assume the core is not ferromagnetic. [NCERT] (3 M)
Answer One suitable design: $n\approx1000\,\mathrm{m^{-1}}$, $I\approx8\,\mathrm{A}$; cross-section about $10^{-3}\,\mathrm{m^2}$. 📝
Detailed Solution

The required magnetic field is

$$ B=100\,\mathrm{G} =100\times10^{-4}\,\mathrm{T} =10^{-2}\,\mathrm{T} $$

For an air-core solenoid,

$$ B=\mu_0nI $$

Therefore,

$$ nI= \frac{B}{\mu_0} $$
$$ nI= \frac{10^{-2}} {4\pi\times10^{-7}} $$
$$ nI\approx7.96\times10^3 \approx8000 $$

The maximum allowed winding density is $1000\,\mathrm{turns/m}$. Choosing

$$ n=1000\,\mathrm{m^{-1}} $$

requires

$$ I= \frac{8000}{1000} \approx8\,\mathrm{A} $$

This is below the maximum current capacity of 15 A.

Thus, one suitable design is approximately $1000$ turns per metre carrying a current of $8$ A, with cross-sectional area about $10^{-3}\,\mathrm{m^2}$. For a 10 cm winding length, this corresponds to about 100 turns.

5
A toroid has a core (non-ferromagnetic) of inner radius 24 cm and outer radius 25 cm, around which 3500 turns of a wire are wound. If the current in the wire is 10 A, what is the magnetic field
(i) outside the toroid?
(ii) inside the core of the toroid?
(iii) in the empty space surrounded by the toroid? (3 M)
Answer (i) $0$    (ii) $2.86\times10^{-2}\,\mathrm{T}$ at the mean radius    (iii) $0$ 📝
Detailed Solution

For the toroid,

$$ N=3500,\qquad I=10\,\mathrm{A} $$

The mean radius is

$$ r= \frac{24+25}{2}\,\mathrm{cm} =24.5\,\mathrm{cm} =0.245\,\mathrm{m} $$

The magnetic field inside a non-ferromagnetic toroid at radius $r$ is

$$ B= \frac{\mu_0NI}{2\pi r} $$

(i) Outside the toroid

An Amperian loop outside the toroid encloses zero net current, so

$$ B=0 $$

(ii) Inside the core

$$ B= \frac{ 4\pi\times10^{-7} \times3500 \times10 }{ 2\pi\times0.245 } $$
$$ B\approx2.86\times10^{-2}\,\mathrm{T} $$

(iii) In the empty space surrounded by the toroid

For an Amperian loop lying in the central empty region, the enclosed current is zero. Hence,

$$ B=0 $$

You may also like

Leave a Comment

Join Telegram Channel

Editable Study Materials for Your Institute - CBSE, ICSE, State Boards (Maharashtra & Karnataka), JEE, NEET, FOUNDATION, OLYMPIADS, PPTs