ISC Class 12 Physics Cells, EMF and Internal Resistance Numerical Problems with Solutions

  • Last modified on:16 hours ago
  • Reading Time:17Minutes
Home ISC Class 12 Physics ISC Class 12 Physics Numericals ISC Class 12 Physics Cells, EMF and Internal Resistance Numerical Problems with Solutions

Practice topic-wise numerical problems on Cells, EMF and Internal Resistance for ISC Class 12 Physics. These problems cover terminal potential difference, charging and discharging cells, internal resistance, series and parallel combinations of cells, current density and battery terminal voltage.

Attempt each problem independently and then use the Show Answer & Explanation button to check the final answer and complete detailed solution.

Numerical Problems on Cells, EMF and Internal Resistance

ISC Class 12 Physics · Chapter 3 · Current Electricity
N

Cells, EMF and Internal Resistance Numericals

Practice numerical problems with answers and detailed solutions
ISC Class 12 · Chapter 3
1
A 2 V battery with internal resistance of $0.1\,\Omega$ is charged with a current of 5 A. Calculate the potential difference between the terminals of the battery. [ISC 2005] (1 M)
Answer $2.5\,\mathrm{V}$ 📝
Detailed Solution

Given,

$$ E=2\,\mathrm{V},\qquad I=5\,\mathrm{A},\qquad r=0.1\,\Omega $$

When a cell is being charged, its terminal potential difference is greater than its emf:

$$ V=E+Ir $$

Therefore,

$$ V=2+(5)(0.1)=2.5\,\mathrm{V} $$
2
Calculate the electric current density in a uniform wire connected to a battery of emf 3.5 V and negligible internal resistance. The resistance of the wire is $2.0\,\Omega$ and its area of cross-section is $0.70\times10^{-6}\,\mathrm{m^2}$. [ISC 2007] (2 M)
Answer $2.50\times10^6\,\mathrm{A/m^2}$ 📝
Detailed Solution

Since the internal resistance of the battery is negligible,

$$ I=\frac{E}{R} =\frac{3.5}{2.0} =1.75\,\mathrm{A} $$

Current density is

$$ J=\frac{I}{A} $$

Hence,

$$ J=\frac{1.75}{0.70\times10^{-6}} =2.50\times10^6\,\mathrm{A/m^2} $$
3
Three identical cells each of emf 2 V and internal resistance $1\,\Omega$ are connected in series to form a battery. The battery is then connected to a parallel combination of two identical resistors, each of resistance $6\,\Omega$. Find the current delivered by the battery. [ISC 2015] (2 M)
Answer $1\,\mathrm{A}$ 📝
Detailed Solution
Three 2 V cells with internal resistance 1 ohm in series feeding two 6 ohm resistors in parallel

The three cells are connected in series, so

$$ E_{\text{eq}}=2+2+2=6\,\mathrm{V} $$

Total internal resistance of the battery is

$$ r_{\text{eq}}=1+1+1=3\,\Omega $$

The two $6\,\Omega$ resistors are in parallel:

$$ R=\frac{6\times6}{6+6} =3\,\Omega $$

Thus the total resistance in the circuit is

$$ R_{\text{total}}=3+3=6\,\Omega $$

Therefore, the current delivered by the battery is

$$ I=\frac{E_{\text{eq}}}{R_{\text{total}}} =\frac{6}{6} =1\,\mathrm{A} $$
4
Find the emf of the battery shown in the figure.
Battery arrangement with 1 V, 2 V and 3 V cells in one branch and a 6 V cell in the other branch
[ISC 2014] (2 M)
Answer $6\,\mathrm{V}$ 📝
Detailed Solution

The 1 V, 2 V and 3 V cells in the upper branch are in series and aid one another.

Equivalent upper branch of 1 V, 2 V and 3 V cells in series
$$ E_{\text{upper}}=1+2+3=6\,\mathrm{V} $$

The upper branch is therefore equivalent to a 6 V source. It is connected in parallel with the 6 V cell in the lower branch with the same polarity.

Two 6 V sources connected in parallel with the same polarity

For two identical ideal cells connected in parallel with the same polarity, the equivalent emf is the emf of one cell.

$$ E_{\text{eq}}=6\,\mathrm{V} $$
5
A battery of emf 10 V and internal resistance $3\,\Omega$ is connected to a resistor. If the current in the circuit is 0.5 A, what is the resistance of resistor? What is the terminal voltage of the battery when the circuit is closed? [NCERT] (3 M)
Answer Resistance $=17\,\Omega$; terminal voltage $=8.5\,\mathrm{V}$ 📝
Detailed Solution

Given,

$$ E=10\,\mathrm{V},\qquad r=3\,\Omega,\qquad I=0.5\,\mathrm{A} $$

Using

$$ I=\frac{E}{R+r} $$

we get

$$ R=\frac{E}{I}-r =\frac{10}{0.5}-3 =17\,\Omega $$

Terminal voltage of the battery is

$$ V=IR =(0.5)(17) =8.5\,\mathrm{V} $$
6
The reading on a high-resistance voltmeter, when a cell is connected across it, is 2.2 V. When the terminals of the cell are also connected to a resistance of $5\,\Omega$ as shown in the circuit, the voltmeter reading drops to 1.8 V. Find the internal resistance of the cell.
Cell connected to a high-resistance voltmeter and a 5 ohm resistor through a key
(3 M)
Answer $\frac{10}{9}\,\Omega\approx1.11\,\Omega$ 📝
Detailed Solution

With only the high-resistance voltmeter connected, negligible current is drawn, so the voltmeter reading gives the emf:

$$ E=2.2\,\mathrm{V} $$

When the $5\,\Omega$ resistor is connected, the terminal voltage is

$$ V=1.8\,\mathrm{V} $$

For a cell supplying current through external resistance $R$,

$$ r=R\left(\frac{E}{V}-1\right) $$

Therefore,

$$ r=5\left(\frac{2.2}{1.8}-1\right) $$
$$ r=5\left(\frac{0.4}{1.8}\right) =\frac{10}{9}\,\Omega \approx1.11\,\Omega $$
7
In the figure shown, an ammeter $A$ and a resistor of $4\,\Omega$ are connected to the terminals of the source. The emf of the source is 12 V having an internal resistance of $2\,\Omega$. Calculate the voltmeter and ammeter readings.
12 V source of internal resistance 2 ohm connected to 4 ohm resistor, ammeter and voltmeter
(3 M)
Answer Ammeter $=2\,\mathrm{A}$; voltmeter $=8\,\mathrm{V}$ 📝
Detailed Solution

The current in the circuit is

$$ I=\frac{E}{R+r} =\frac{12}{4+2} =2\,\mathrm{A} $$

Thus the ammeter reading is

$$ I=2\,\mathrm{A} $$

The terminal voltage across the cell is

$$ V=E-Ir $$
$$ V=12-(2)(2) =8\,\mathrm{V} $$

Hence, the voltmeter reads 8 V.

8
A battery of emf 12 V and internal resistance $2\,\Omega$ is connected to a $4\,\Omega$ resistor as shown in the figure.
12 V battery of internal resistance 2 ohm connected to 4 ohm resistor with voltmeter and ammeter

(i) Show that a voltmeter when placed across the cell and across the resistor, in turn, gives the same reading.
(ii) To record the voltage and the current in the circuit, why is voltmeter placed in parallel and ammeter in series in the circuit? (3 M)
Answer (i) Both readings $=8\,\mathrm{V}$    (ii) Voltmeter is connected in parallel; ammeter in series. 📝
Detailed Solution

(i) Total resistance in the circuit is

$$ R_{\text{total}}=4+2=6\,\Omega $$

Therefore, current in the circuit is

$$ I=\frac{12}{6} =2\,\mathrm{A} $$

Terminal voltage across the battery is

$$ V_b=E-Ir =12-(2)(2) =8\,\mathrm{V} $$

Potential difference across the external resistor is

$$ V_R=IR =(2)(4) =8\,\mathrm{V} $$

Thus, a voltmeter placed across the cell and then across the resistor gives the same reading of 8 V.

(ii) A voltmeter is connected in parallel with the device whose potential difference is to be measured, because parallel branches have the same potential difference. A voltmeter has very high resistance, so it draws negligible current.

An ammeter is connected in series because it must carry the same current as the circuit element whose current is being measured. Its resistance is very low; connecting it in parallel would effectively short-circuit the branch and may damage the ammeter.

9
A 10 V battery of negligible internal resistance is connected across a 200 V battery and a resistance of $38\,\Omega$. Find the value of the current in the circuit. (3 M)
Answer $5\,\mathrm{A}$ 📝
Detailed Solution

The positive terminals of the two batteries are connected together, so the emfs oppose each other.

$$ E_{\text{net}}=200-10 =190\,\mathrm{V} $$

The resistance in the circuit is $38\,\Omega$.

$$ I=\frac{E_{\text{net}}}{R} =\frac{190}{38} =5\,\mathrm{A} $$
10
(i) Six lead-acid type secondary cells each of emf 2 V and internal resistance $0.015\,\Omega$ are joined in series to provide a supply to a resistance of $8.5\,\Omega$. What are the current drawn from the supply and its terminal voltage?
(ii) A secondary cell after long use has an emf of 1.9 V and a large internal resistance of $380\,\Omega$. What maximum current can be drawn from the cell? Could the cell drive the starting motor of a car? [NCERT] (3 M)
Answer (i) Current $\approx1.4\,\mathrm{A}$; terminal voltage $\approx11.9\,\mathrm{V}$    (ii) $I_{\max}=0.005\,\mathrm{A}$; No. 📝
Detailed Solution

(i) Six cells are connected in series.

$$ E_{\text{total}}=6\times2 =12\,\mathrm{V} $$

Total internal resistance is

$$ r_{\text{total}}=6\times0.015 =0.09\,\Omega $$

Therefore,

$$ I=\frac{12}{8.5+0.09} \approx1.4\,\mathrm{A} $$

Terminal voltage of the battery is

$$ V=IR =(1.4)(8.5) \approx11.9\,\mathrm{V} $$

(ii) The maximum current is obtained when the external resistance is zero:

$$ I_{\max}=\frac{E}{r} =\frac{1.9}{380} =0.005\,\mathrm{A} $$

This current is extremely small compared with the large current required by a car starting motor. Hence, the cell cannot drive the starting motor of a car.

11
Calculate the current in the circuit shown below. What is the terminal potential of each cell?
Circuit with 1.5 V and 2.5 V cells of internal resistances 0.5 ohm and 0.3 ohm and an external 1.2 ohm resistor
(3 M)
Answer Current $=2.0\,\mathrm{A}$; terminal potentials $=0.5\,\mathrm{V}$ and $1.9\,\mathrm{V}$ 📝
Detailed Solution

The two cells aid each other.

Total emf is

$$ E_{\text{total}}=1.5+2.5 =4.0\,\mathrm{V} $$

Total resistance is

$$ R_{\text{total}}=0.5+0.3+1.2 =2.0\,\Omega $$

Hence,

$$ I=\frac{4.0}{2.0} =2.0\,\mathrm{A} $$

Terminal potential of the 1.5 V cell is

$$ V_1=E_1-Ir_1 =1.5-(2)(0.5) =0.5\,\mathrm{V} $$

Terminal potential of the 2.5 V cell is

$$ V_2=E_2-Ir_2 =2.5-(2)(0.3) =1.9\,\mathrm{V} $$

You may also like

Leave a Comment

Join Telegram Channel

Editable Study Materials for Your Institute - CBSE, ICSE, State Boards (Maharashtra & Karnataka), JEE, NEET, FOUNDATION, OLYMPIADS, PPTs